Mazda CX‌-30 Forum banner
21 - 40 of 59 Posts

· Registered
Joined
·
134 Posts
Discussion Starter · #23 ·
NEW UPDATE Ver. 7000C0A-NA01_12004

For NORTH AMERICA ONLY


The following bug fixes...

Album artwork may not appear when playing music using an USB connected iPhone.

The center display may turn black when the gear is shifted from reverse position to parking position.

Screen freezes and goes to white screen, then the system reboots.

Steering wheel switches and commander switches cannot control the audio system.

DTC U3000:49 is stored which may be accompanied with following symptoms.
  • No sound comes out from the speakers.
  • Audio source selection is unavailable.

When using the navigation with head-up mode, the vehicle icon rotates.

Beep sounds every after couple of minutes.

Language setting may not be accepted correctly.

The audio track may not pause when pressing the mute button.

The system reboots.

The screen may turn black when trying to play a video file in the USB connected device.
 

· Registered
Joined
·
4 Posts
NEW UPDATE Ver. 7000C0A-NA01_12004

For NORTH AMERICA ONLY


The following bug fixes...

Album artwork may not appear when playing music using an USB connected iPhone.

The center display may turn black when the gear is shifted from reverse position to parking position.

Screen freezes and goes to white screen, then the system reboots.

Steering wheel switches and commander switches cannot control the audio system.

DTC U3000:49 is stored which may be accompanied with following symptoms.
  • No sound comes out from the speakers.
  • Audio source selection is unavailable.

When using the navigation with head-up mode, the vehicle icon rotates.

Beep sounds every after couple of minutes.

Language setting may not be accepted correctly.

The audio track may not pause when pressing the mute button.

The system reboots.

The screen may turn black when trying to play a video file in the USB connected device.
Hi, could you send this firmware for American cx-30?
 

· Registered
Joined
·
1 Posts
this is a very informative thread. I've just bought a 2019 CX3 and can't believe it doesn't come stock with CarPlay. Im looking to retrofit this myself, so hopefully will be able to secure the firmware update to allow me to install the CarPlay adapter.
 

· Registered
CX-30 2022 eSkyActivX 186hp - FWD AT
Joined
·
5 Posts
Just picked-up my cx-30 today ( EU, JP built) and the version shown is 12006. This should be fairly new right? (got one "unknown error" and restart when trying to set the home address in the navi and it worked at the second attempt, rest works fine).
 

· Registered
CX-30 2022 eSkyActivX 186hp - FWD AT
Joined
·
5 Posts
@alphonse the latest available in the www for your connect system version is 12004, so you are even ahead (y)
I will check again the version. I explicitly asked my dealer to update it because the car was delivered in August but could not be picked-up earlier (paperwork, my doing, nothing to blame Mazda or the dealer). And somehow I had the impression that the latest version was 14xxx and was pissed about it. Then I came to check this forum and lo and behold, I am a beta tester :)
 

· Registered
Joined
·
134 Posts
Discussion Starter · #31 ·
NEW UPDATE Ver. 7000C0A-NA04_12004

For NORTH AMERICA ONLY

For BP Mazda3 and CX-30 TURBO Made Before July 1, 2021.

Some of the following bug fixes...

Ver. 7000C0A-NA04_12004 and later fixes these software errors (bugs):

Album artwork may not appear when playing music using an USB connected iPhone.

When the gear position is shifted into P from R, the screen may not return to the previous condition before shifting into R position.

The screen freezes and goes to a white screen, then the system reboots.

The steering wheel switches and commander switches cannot control the audio system.

DTC U3000:49 is stored which may be accompanied with following symptoms:
No sound emitting from the speakers.
Audio source selection is unavailable.

The vehicle icon rotates when using the navigation with head-up mode.

Beep sounds every after couple of minutes.

Language setting may not be accepted correctly.

The audio track may not pause when pressing the mute button.

The system reboots.

The screen may turn black when trying to play a video file in the USB connected device
 

· Registered
Joined
·
1 Posts
Hi ASH8!

I couldn't send you a private message :( I was trying to use traffic cam warnings but there is no warning settings in my navigator. I have 2020 CX-30 and I'm from Finland. Current package is 10042. Can you send me the download link?

Thank you!
 

· Registered
2020 Mazda CX30 2.5L Non-Turbo FWD
Joined
·
1 Posts
CONNECT UPDATE FIRMWARE 7th Gen from 2019~ onward,
Message me for your private download link only, Inc your Mazda's Model, Year, your Country.
Links will not be posted in forums.

ALL DETAILS UPDATED BELOW from July 18th, 2022.


File Description example for North America market.
CMU 7000C0A-NA03 11048
  • CMU = Unit
  • 7000C0A-NA03 = Model ID
  • 11048 = Software Version
NEXT Generation (2019 ~) Genuine Mazda CONNECT Firmware is here...
EU** is for Europe, UK, Australia, New Zealand.
NA** is for North America, USA, Canada, Mexico.
4A** is for GENERAL R.H.D - L.H.D, Except Hong Kong and Macau.
HK** is for Hong Kong and Macau.

These SINGLE .kwi File are ONLY for Mazda 3 (BP) and Mazda CX-30 (DM) MX-30 (DR) CX-50 (VA) , CX-60 (KH) also specific 2021~ CX-5 and CX-9.
Can Not
be used in the Original Mazda/MZD Connect of 2014-20xx or 6th Generation model.

NOTE:
You can not rename the downloaded new File whatsoever.
You can not have ANY other file or files or folders on your flash drive to do install.
CX-60~ uses USB 'C' Flash Drive port (Can not use any USB 'A' adapters).

You must only have the correct ONE single .kwi file on a FAT32 ( < 32 GB) Flash Drive, file CAN NOT be in a .zip or .rar format... ONLY in a .kwi
format.

IF still having issues of CMU not seeing USB Flash Drive do a full format clean of Drive.
Put a small <16GB USB Drive in Windows 10 PC, go to Start, This PC, RIGHT Click on the Drive, Select Format.., Select FAT32, Select Start, click OK, all files on Drive will be Deleted and Drive Re-Formatted (cleaned).
Copy and Paste new Firmware file ONLY on Drive, remove from PC and try in your car again.

IF you are using any MacOS PC to download file then that will also corrupt your Flash Drive as Macs adds hidden files onto flash drive and car CMU will not see the .kwi file.

MAZDA ONLY supports MS-Intel Windows 10 64bit OS and is used by all car makers for Diagnostic and Maintenance UPDATES in their Automobiles.
Apple (Mac) systems is not supported or used by any car brands in Service Departments or for Diagnostics, period.

CMU_7000C0A-NA01_12004.kwi * NON Turbo Engine. Mazda3 and CX-30 Before July 1st 2021.
CMU_7000C0A-NA02_11036.kwi * MX-30 Only.
CMU_7000C0A-NA03_11040.kwi * CX-5 + CX-9 2021 on with 10.25 inch center display.
CMU_7000C0A-NA04_12004.kwi * TURBO Mazda3 + CX-30 TURBO Before July 1st 2021.
CMU_7000C0A-NA05_11014.kwi * CX-50 (VA) North America ONLY.
CMU_7000C0A-NA06_12012.kwi * Mazda3 and CX-30 Built AFTER July 1st 2021 to present also with TCU (Telematics Communication Unit).

CMU_7000C0A-EU01_11001.kwi * Mazda3 and CX-30.
CMU_7000C0A-EU02_11028.kwi * MX-30 Only.
CMU_7000C0A-EU03_10028.kwi * CX-5 + CX-9 with 10.3 inch center display.
CMU_7000C0A-EU06_12004.kwi * Mazda3 and CX-30 from VIN 300001 ~
CMU_7000C0A-EU07_14012.kwi * CX-60 (KH).
CMU_7000C0A-EU10_110***.kwi * MX-30 Only from 2022 prod date (file NA yet).

CMU_7000C0A-4A01_10047.kwi * Only have this version.

CMU_7000C0A-HK01
_1***.kwi Do not have any copies.


The NA** file is for North America ONLY.
The EU** file is for Europe/UK/Australia and New Zealand.
The 4A** file GENERAL R.H.D - L.H.D except Hong Kong and Macau.
The HK** file is for Hong Kong and Macau.

Do this to find out what Version NUMBER is running in your car now..
1. Turn the ignition to ACC or ON.
2. Select ”Settings” on the Home screen.
3. Select “System Setting”.
4. Select “System Information”.
5. Select “Version Information”.
6. See 'System Software': version number eg,10016 or 12001, etc
If your cars NUMBER is Below those for your Country and Car Model shown above then you can UPDATE to a later and better version.
No, I do not have Changelogs for every update change.

I CAN SUPPLY YOU ONE (1) OF THE ABOVE .kwi FILES TO UPDATE YOUR MAZDA CONNECT, BUT IF YOUR CAR MODEL ALREADY HAS A HIGHER NUMBER (11000, 10028, 11047, etc) THEN ABOVE I CAN NOT HELP YOU AS YOU CAN ONLY INSTALL A HIGHER VERSION THAN WHAT IS ALREADY PRESENT IN YOUR MAZDA.
NOTE THE VERSIONS: Like NA01, NA05, EU02, EU03, 4A01, HK01 AS THESE ARE FOR SPECIFIC COUNTRY and REGIONS Only, YOU CAN NOT MIX or CHANGE COUNTRY and MODEL TYPE from your cars ORIGINAL FACTORY INSTALL.

Full Install instructions are provided and is very easy to install.
Usually your Mazda Dealer does not update Firmware unless you complain of a specific issue.
Hello,
I tried to send you a private conversation but it would not let me send it. I have a 2020 Mazda CX30 2.5L Non-Turbo North America. Could you send me a link for the latest firmware update? I am new to the forum and to the Mazda world but from what I can tell with mine it looks like it was never updated from the version it was on when the original owner purchased it but I like to always be up-to-date on maintenance and software updates so I would like to find out how to update this myself.

Thank you
 

· Registered
Joined
·
1 Posts
Hey there,
Since I'm new to the forum it won't let me send private msgs yet. I was wondering if you could help me with the latest software update file for my Mazda. It would be greatly appreciated. My vehicle is 2021 CX-30 Turbo PP, North America, built after July 2021.
Thank you. 👍🏻
 

· Registered
Joined
·
11 Posts
Hey @ASH8
Super thread. We recently received our 2022 Mazda CX-30 GTX AWD today. We are in New Zealand and I just wanted to check with you to see that we on the most current release for our region? The dealer said it was, keen for a second opinion :) The ‘System Software’ shows -12004. Cheers, Mick
 

· Registered
Joined
·
2 Posts
@ASH8
Hi im just got my 2020 cx30 sp soul red non-turbo for 5th day my car country is Thailand
sir i just wanna ask
mycurrent firmware is 10044
i wish to upgrade and i just wanna know if the firmware is the information below are match with my car ?

CMU_7000C0A-4A01_10047.kwi

if it does or there is any better version can i please have it

ps. can u please guide me if there anyway that i can activate stop & go on my car and another function as well, i will take the risk is it anything has to do with firmware ?
any information would be super great
if there is anything can unlock the function that has hidden on my car please tell me if u can too im looking to learn more it would be great if i can do manythings to playaround in my car more than stock version

thankyou
Best Regards
Jay
 
21 - 40 of 59 Posts
Top