Mazda CX‌-30 Forum banner
1 - 8 of 8 Posts

·
Registered
2021 Mazda CX-30 Turbo Premium (Polymetal Gray)
Joined
·
74 Posts
Discussion Starter · #1 ·
Left side driver like in the states...... I have an intermittent rattle from the side panel in between the front and back door. The panel is to the left of the driver's left shoulder. I've put pressure on different parts of the panel while driving but the rattle remains. The panel looks simple enough to remove, but I'm not totally sure how to do that. Any ideas? I'd rather not take it to the dealer. I'm sure it's a wire run retainer or some stupid thing that is loose under that panel.

Thanks.
 

·
Registered
Mazda CX-30 Turbo Premium Plus in Snowflake White Pearl
Joined
·
65 Posts
Check your door hinges. Dealer adjusted mine under warranty, no more noise.
 

·
Premium Member
2021 Mazda CX-30 AWD Turbo Premiun, Soul Red
Joined
·
91 Posts
I have the same noise, worse when cool, so following this.
I will check my door hinges, thanks for that!
 

·
Registered
2021 Mazda CX-30 Turbo Premium (Polymetal Gray)
Joined
·
74 Posts
Discussion Starter · #5 ·
Thank you for the quick responses! I played with the seat belt adjuster, held it firmly, etc.... doesn't seem to be coming from that. Door hinges or the door catch mechanism? Didn't know you could adjust those. Anyway, thank you again!
 

·
Premium Member
2021 Mazda CX-30 AWD Turbo Premiun, Soul Red
Joined
·
91 Posts
ETCS(SW)
Always good to see another sailor.
I am a ETCM(SS) retired
 

·
Registered
2021 Mazda CX-30 Turbo Premium (Polymetal Gray)
Joined
·
74 Posts
Discussion Starter · #7 ·
ETCS(SW)
Always good to see another sailor.
I am a ETCM(SS) retired
Thanks brother. Thank you for your service to our great country
 

·
Registered
2021 Mazda CX-30 Turbo Premium (Polymetal Gray)
Joined
·
74 Posts
Discussion Starter · #8 ·
FIXED! The STUPIDEST and easiest fix ever I guess. I happened to clean off the metal loop on the door frame where the door latch catches when you close the door. I wiped it off, put a little lithium grease on it, and the rattle is gone. My car is new, the metal loop isn't deformed or anything. Maybe there was some grit on it or something. Don't know. All I can tell you is it takes 5 seconds to wipe that sucker off and put some lube on it to try it.
 
  • Like
Reactions: Copland Navi
1 - 8 of 8 Posts
Top