Mazda CX‌-30 Forum banner
Cancel

What Have You Done To Your CX-30 Today?

73407 Views 326 Replies 83 Participants Last post by  UCMazda, 
20CX30JBM
For me today, not much. Transferred our license plates to the 30 and drove it to the local polling location.
Reply
Save
Like
  • Like
Reactions: 1
1 - 20 of 327 Posts
20CX30JBM
My WeatherTech order is trickling in, so I installed the first item to arrive, the cargo liner.
Reply
Save
Like
  • Like
Reactions: 1
20CX30JBM
conwelpic said:
can you post a photo of the cargo liner as on their website it only shows a "representative image", not the specific CX-30 model.
Click to expand...
I will post a pic in the morning.
My front and rear seat floor liners arrived today, tomorrow they go in.
Reply
Save
Like
20CX30JBM
$81 is a deal!
Reply
Save
Like
20CX30JBM
3
WeatherTech Cargo Liner

Attachments

See less See more
Reply
Save
Like
  • Like
Reactions: 3
20CX30JBM
My wife headed out this morning to get coffee, two minutes out the door I get a call, there is a warning that a tire is low. She returned, I checked it out, a screw in the RR tire. 200 miles on the tires.
TPMS is great to have and kudos to Discount Tire, I didn't know they fix flats for free.
Reply
Save
Like
20CX30JBM
That's messed up. Good luck!
Reply
Save
Like
20CX30JBM
Installed Weathertech LampGard. The passenger side went really well, the drivers side took much longer to get everything to lay down like the other. Pic doesn't really show much, some dried soapy water mix.
Car Headlamp Automotive lighting Vehicle Automotive exterior
See less See more
Reply
Save
Like
20CX30JBM
2
Tonight I decided it was time to start detailing the -30 to get it ready for paint sealant. There were several water spots and a few bird poo etchings to address on the hood. In addition there were some markings in the clear that I wanted to make sure they would go away.
Hood Vehicle Car Metal

After 2k grit scuffing on the right. After 1st compound application on the left.
Automotive exterior Bumper Vehicle Auto part Car

Entire hood after compound. First polish to follow.
See less See more
Reply
Save
Like
  • Like
Reactions: 3
20CX30JBM
steve67 said:
what are you using for lsp?
Click to expand...
I will be using Wolfgang Profi ceramic coating. Until I get all panels prepped to apply the coating at one time, I will be protecting with a carnauba wax.
Reply
Save
Like
  • Like
Reactions: 1
20CX30JBM
Michel said:
I wrapped the side plastics of mine cx30 in the same colour as the body
Click to expand...
Can you post any up-close pics?
Reply
Save
Like
20CX30JBM
Nice! You wrapped these yourself?
Are you thinking of wrapping the rear bumper?
Reply
Save
Like
20CX30JBM
fumoffu said:
Installed the corksport cx30 exhaust. Got a deeper growl to it.

Took me 45 min to install without jacking up the rear. Silicone lube ftw for the hangers.
Click to expand...
X2.
Reply
Save
Like
  • Like
Reactions: 1
20CX30JBM
Removed the Magnaflow exhaust and reinstalled the Corksport. Ordered the CS rear swaybar, delivery sometime in Sept.
Reply
Save
Like
20CX30JBM
20CX30JBM said:
Removed the Magnaflow exhaust and reinstalled the Corksport. Ordered the CS rear swaybar, delivery sometime in Sept.
Click to expand...
MF axle back exhaust listed in for sale forum.
Reply
Save
Like
20CX30JBM
Not much lately. With the snow that was forecast late last week, I removed my summer tires, reinstalled the OE's and parked the 30 and covered it.
Reply
Save
Like
20CX30JBM
This afternoon I installed my CS rear sway bar. I don't have any driving impressions at this time.
I was going to install the black roof reveal moldings in place of the roof rack rails but, I have misplaced the install clips for the moment. The xxxxing original rail mounting clips are a PITA to remove, they were heavily coated with red thread locker at install.
Reply
Save
Like
  • Like
Reactions: 1
20CX30JBM
I removed my roof rails and replaced them with the black inserts. Way back I had thought about cross bars and a roof box but....I don't like the cross bars that are available and it appears to me that loading and unloading the box would be a ditch. Additionally the OE rails are aluminum and they oxidize, not something I want to maintain.
Reply
Save
Like
20CX30JBM
iulianm said:
For me the "incomplete" feeling is at the interior with the missing cup holder cover as I had on my '19 Mazda3.
I see that in Australia, Canada, Europe they didn't cheapened out as much as in the US and it's available on the top trim level; different markets, different buyers.

How much would that cost them? $20? was it really that necessary? I would have paid for it.

Makes me wonder what else did they cut that we can't see?
Click to expand...
What did you do to your CX30 today?
Reply
Save
Like
20CX30JBM
I got my summer tires out of storage to install and found a nail in one of them. I don't know how I missed that when I put them up last year. I took it to Discount Tire for repair, while repairing they found a way to destroy the TPMS sensor. They did replace it at their expense.
Summer tires are on.
Reply
Save
Like
1 - 20 of 327 Posts
Mazda CX‌-30 Forum
A forum community dedicated to Mazda CX-30 owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, purchasing, maintenance, and more!
Full Forum Listing
Explore Our Forums
Mazda CX‌-30 General Discussion Forum Mazda CX-30 Complaints, Issues And Problems New Member Introductions Mazda CX-30 Modifications Mazda CX‌-30 Pictures
Top